Telemetry Rate
Select the Telemetry Rate form the "Tools" menu in the upper left
corner of the SM2 Control Panel Application. The Telemetry Rate is used when a telemetry recorder is connected to the
DRC-Bus, or when the SM2 is used with the DRC-Link. The current telemetry rate
for a selected SM2 is shown in the upper right side of the application. Telemetry rates can be set to 1Hz, 2Hz, 4Hz, 8Hz, 16Hz,
32Hz, or 64Hz. Only four SM2 devices can be operated at the same time when the
full 64Hz rate is specified. It is usually not necessary to operate the
telemetry any faster than 16Hz for normal operation.
2-Channel Standard Mixer SM2
Copyright © 2009 Desert RC