Normal Operation
The following input specifications are recommended for signal,
voltage, and current ratings under normal operating conditions. Output
signal, voltage, and current ratings are specified as nominal assuming
recommended input conditions are not exceeded.
Parameter Nominal Units
Supply Voltage, VCC
4.0 to 5.5
Volts
Signal Input Voltage, Low Level (Vil)
0.0 to 0.8
Volts
Signal Input Voltage, High Level (Vih)
3.0 to VCC
Volts
Signal Output Voltage, Low Level (Vol)
0.0 to 0.1
Volts
Signal Output Voltage, High Level (Voh)
VCC
Volts
DRC-Bus Power
VCC/GND
Volts
DRC-Bus Network:
Signal Type: Nominal 3.6-volt, single-ended
Duplex: single, multi-drop
Maximum Drops:
32Speed: 250K-baud
Addressing: Single character, assigned at run-time, no data collisions
Data Check: Simple checksum or CRC-16, command dependent
Command Set: DRC Proprietary
Telemetry Enabled: Yes
Telemetry Data: Input pulse width (2-channels), output pulse width (2-channels)
Default Telemetry Rate: 64Hz
2-Channel Standard Mixer SM2
Copyright © 2009 Desert RC